VALOX ? Resin 7062

SI

| British

| Metric

| PDF

Europe-Africa-Middle East: COMMERCIAL

VALOX 7062 is Mineral filled PBT injection molding grade.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Taber Abrasion, CS-17, 1 kg	74	mg/1000cy	SABIC Method
Tensile Stress, break, 5 mm/min	60	MPa	ISO 527
Tensile Strain, break, 5 mm/min	3	%	ISO 527
Tensile Modulus, 1 mm/min	4200	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	100	MPa	ISO 178
Flexural Modulus, 2 mm/min	3900	MPa	ISO 178
Hardness, H358/30	140	MPa	ISO 2039-1
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	0	cm-kgf/cm	ASTM D 256
Izod Impact, notched, -30°C	0	cm-kgf/cm	ASTM D 256
Izod Impact, notched 80*10*4 +23°C	3	kJ/m2	ISO 180/1A
Izod Impact, notched 80*10*4 -30°C	3	kJ/m2	ISO 180/1A
Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm	2	kJ/m2	ISO 179/1eA
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm	2	kJ/m2	ISO 179/1eA
THERMAL	Value	Unit	Standard
Vicat Softening Temp, Rate B/50	175	°C	ASTM D 1525
HDT, 1.82 MPa, 3.2mm, unannealed	65	°C	ASTM D 648
CTE, 23°C to 80°C, flow	9.E-05	1/°C	ISO 11359-2
CTE, 23°C to 80°C, xflow	9.E-05	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C	PASSES	-	IEC 60695-10-2
Vicat Softening Temp, Rate B/50	175	°C	ISO 306
Vicat Softening Temp, Rate B/120	175	°C	ISO 306
PHYSICAL	Value	Unit	Standard
Mold Shrinkage, flow, 3.2 mm (5)	1.2 - 1.9	%	SABIC Method
Density	1.81	g/cm3	ISO 1183
Melt Volume Rate, MVR at 265°C/1.2 kg	21	cm3/10 min	ISO 1133
ELECTRICAL	Value	Unit	Standard
Relative Permittivity, 50/60 Hz	3.7	-	ASTM D 150
Relative Permittivity, 1 MHz	3.6	-	ASTM D 150
Dissipation Factor, 50/60 Hz	0.002	-	ASTM D 150
Dissipation Factor, 1 MHz	0.015	-	ASTM D 150
Comparative Tracking Index	475	V	IEC 60112
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	1.5	mm	UL 94
UL Recognized, 94HB Flame Class Rating 2nd value (3)	3	mm	UL 94
Glow Wire Flammability Index 650°C, passes at	3.2	mm	IEC 60695-2-12

Source GMD, last updated:2011/03/24

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.

上一篇： 暫無相關信息！

下一篇： PBT+PET VALOX 8032U 30%玻璃纖維增強,紫外線穩定.

轉載請注明：轉載自環球塑化資訊網 http://www.pho2grapher.com/news/
本文鏈接：http://www.pho2grapher.com/b-shabo/news269634/
免責聲明：本文"PBT/PET VALOX 7062 礦物填充"僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868